Aluminum Acetylacetonate

Available as a very high purity grade for MOCVD and superconductor work.

Melting Point: 192-193oC

Sublimes at 150oC, 1mm

Material Safety Data Sheet

 Aluminum acetylacetonate 

Section 1 - Chemical Product and Company Identification

MSDS Name: Aluminum acetylacetonate
Catalog Numbers: AL-0020
Synonyms:
Aluminum 2,4-pentanedionate
Company Identification:

 Lorad Chemical Corporation

1200 19th. Street NorthSt. Petersburg, Fl 33713

Tel:727-826-5511

Fax: 727-826-5510


             For emergencies in the
US, call CHEMTREC: 800-424-9300

Section 2 - Composition, Information on Ingredients

 

CAS#

Chemical NamePercentEINECS/ELINCS
13963-57-0ALUMINUM ACETYLACETONATE+99.99237-741-6
 

Section 3 - Hazards Identification

 EMERGENCY OVERVIEWAppearance: Not available.
Caution! May cause eye and skin irritation. May cause respiratory and digestive tract irritation. May cause central nervous system effects. May cause reproductive and fetal effects. The toxicological properties of this material have not been fully investigated.
Target Organs: Nervous system.


Potential Health Effects
Eye: Causes eye irritation.
Skin: Causes skin irritation. May cause dermatitis.
Ingestion: Harmful if swallowed. May cause neurological effects.
Inhalation: Causes respiratory tract irritation. May cause neurological effects.
Chronic: No information found.

Section 4 - First Aid Measures



Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately. Wash mouth out with water.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures



General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Flash Point: Not available
Autoignition Temperature: 500 deg C ( 932.00 deg F)
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: Not published.

Section 6 - Accidental Release Measures



General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container.

Section 7 - Handling and Storage



Handling: Wash thoroughly after handling. Avoid contact with skin and eyes. Avoid ingestion and inhalation. Use only in a chemical fume hood.
Storage: Store in a cool, dry place. Store in a tightly closed container.

Section 8 - Exposure Controls, Personal Protection



Engineering Controls: Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits.
Exposure Limits

Chemical Name

ACGIHNIOSHOSHA - Final PELs
ALUMINUM ACETYLACETONATE none listed none listed none listed

OSHA Vacated PELs: ALUMINUM ACETYLACETONATE: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29
CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - Physical and Chemical Properties



Physical State: Solid
Appearance: Not available.
Odor: Faint odor
pH: Not available.
Vapor Pressure: < 1 hPa @ 20 deg C
Vapor Density: Not available.
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: 315 deg C @ 760.00mm Hg
Freezing/Melting Point:192-193 deg C
Decomposition Temperature:> 140 deg C
Solubility: insoluble in water.
Specific Gravity/Density:Not available.
Molecular Formula:C15H21O6Al


Molecular Weight:324.30

Section 10 - Stability and Reactivity



Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials.
Incompatibilities with Other Materials: Strong oxidizing agents, strong bases.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, 2,4-pentanedione, aluminum oxide.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information



RTECS#:      
CAS# 13963-57-0: BD2230000
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 13963-57-0: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.
Mutagenicity: No information available.
Neurotoxicity: No information available.
Other Studies:

Section 12 - Ecological Information


No information available.

Section 13 - Disposal Considerations


Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

 

US DOT 
Shipping Name:Not regulated as a hazardous material 
Hazard Class:  
UN Number:  
Packing Group:  
 

Section 15 - Regulatory Information


US FEDERAL

TSCA
     
CAS# 13963-57-0 is listed on the TSCA inventory.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
     This material does not contain any hazardous air pollutants.
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA.
     None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     
CAS# 13963-57-0 is not present on state lists from CA, PA, MN, MA, FL, or NJ.

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.


European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
     XN
Risk Phrases:

     R 22 Harmful if swallowed.
     R 36/37/38 Irritating to eyes, respiratory system and skin.

Safety Phrases:

     S 26 In case of contact with eyes, rinse immediately with plenty of
     water and seek medical advice.
     S 37/39 Wear suitable gloves and eye/face protection.

WGK (Water Danger/Protection)

     
CAS# 13963-57-0: 2
Canada - DSL/NDSL
     
CAS# 13963-57-0 is listed on Canada's DSL List.
Canada - WHMIS
     WHMIS: Not available.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List

Section 16 - Additional Information


MSDS Creation Date: 8/24/2007
 

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Lorad be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Lorad has been advised of the possibility of such damages.
 

 



Back
Request Aluminum Acetylacetonate by email sales@loradchemical.com

Phone: 727-826-5511
Fax: 727-826-5510

General Compound List
Many of the following materials can be manufactured in bulk quantities. Some however, are very specialized and may be manufactured in smaller quantities.

Granular or tablet form. Please inquire to request special purity or particle size. Many of the ceramic formulations can be manufactured in bulk quantities and with specific additives to modify dielectric characteristics. It is important to note that we are not resellers, we are manufacturers, and we custom synthesize all the chemical products we offer. If we do not have the material you require in stock, we will custom synthesize it to your exact specification, provide you with a detailed analytical report, and still be at a very competitive price.